TABLE OF CONTENTS
3, the main performance parameters
4, use and installation
5, transport storage requirements
8, the product usage
Remarks: We can also provide semi assembled components:
LED Street light housing
AC 85-265V LED Power Supply,20KV Surge Protection Device
Photocell control switch
0-10V dimmable AC 85-265V LED Power Supply
timer dimming AC 85-265V / DC 12V-24V LED Power Supply
Programmable AC 85-265V / DC 12V-24V LED Power Supply
DC 12-24V LED driver
high power led
Provide technical instruction for assemble a LED street light
20W LED street light use 1 PCS 20W LED as light source, the internal work for the constant current source power supply, external wide voltage input (AC85-277V or DC 12-24V) of the new energy-saving lamps, LED resulting spectrum, there is no ultraviolet, infrared, heat and radiation, is a typical green lighting. With good light and dust and water resistance, light itself has a good self-cleaning, a safe, reliable, low power consumption, long service life.
Reasonable structure, beautiful shape, heat resistance, good sealing performance.
High luminous efficiency, visual fidelity, flicker-free, eyes and skin without any harm, safe.
Selection of new LED light source and equipped with a specially designed light distribution system. Light Source 50,000 hours of continuous use, more than 10 years service life, life without changing light.
Under the same illumination than the high-pressure sodium lamps save 60%, 80% more than incandescent.
The light installation flexibility.
Pollution-free energy-saving environmental protection, high stability. LED environmental pollution, the use of high stability, to achieve a true sense of the green lighting.
Housing Material Description
1, structural material
Lamp parts made of aluminum alloy die-casting, high quality glass with good light and dust-proof and waterproof, sealed firmware to enhance security and reliability of the lamp.
2, surface treatment
Use environmentally friendly powder coating, so that light itself has a good self-cleaning
City roads, residential areas, industrial areas, sidewalks, parks, schools, villas, gardens and other places lighting.
The lamp uses Bridgelux high power LED chip as the light source, coupled with high efficiency AC / DC switching power supplies or DC / DC current drive power, the power efficiency up to 90%, constant current drive power efficiency up to 95%.
3, the main performance parametersLED street light basic parameters as follows:
Warm white CCT
Pure White CCT
Cool White CCT
LED Qty of Chips
LED Chip Brand
2、Fixture Technical Parameter
Total Harmonic Distortion
≤ 9 %
LED Working Voltage
The qty of led
Led Luminous Efficiency
Led Initial Flux
The irradiation Are is a circular with 1072.60cm Diameter
The irradiation Are is a circular with 1430.14cm Diameter
The irradiation Are is a circular with 1787.67cm Diameter
Detail information refer to above LED
Color Rendering Index
symmetric expression / circular light spot
LED +The reflectors second light distribution
LED Junction Temperature
-25℃～ +65℃ （25℃ is the optimal）
4, use and installation
This product is suitable for industrial AC power supply network, using the ambient temperature range is -30 ℃ ~ 55 ℃.
Installation of cable at the first street light take a length of 15-18 meters of cable wire (the actual length of the street lights installed at the height may be), cable specification: 3 * 1 m (squared), the skin black, diameter 8mm, cable outlet connection required (with wiring label). Check and correct, power, lights to work.
5, transport, storage requirements
Lights in paper bag (internal plus foam) during transport is not allowed by severe mechanical shock and exposure to rain, not upside down to prevent throwing throwing, rolling, weight.
Lights should be stored in a cool, dry, clean environment, the storage temperature is -10 ℃ ~ 85 ℃.
Before use read the instructions to avoid accidents and damage.
This product is maintenance-free products, generally does not require maintenance. For repairs, please contact us.
Lights should be carefully checked before use, use if unusual phenomena, please contact us.
Use, the light surface of a certain temperature is normal.
7 security warning
Installation must ensure that the lamp is intact before installation.
Do not exert force on the street or throw throw.
Lights installed prior to use should be stored in a cool, dry, clean environment, water or fire ban in place.
8, the product state
1, in normal conditions, the product warranty for two years, according to the date of the factory, the warranty period, the product fails, the test is the quality of the company, their products will get in for free maintenance.
2, the following circumstances, not within the warranty:
(1) does not require the use of damage according to the instructions of the product;
(2) user-dismantled the internal parts to damage product situation;
(3) serious damage to the product shape or deformation of the case;
(4) products on the date of manufacture or body serial number erased or altered circumstances;
3, the company shipped the product's maximum liability is the replacement of the same type and quantity of the product.
packing size & weight
The size of the CTN
60*28.5*32cm20 PCS / CTN
The weight of the CTN after packing
The size of box
355*110*70mm, 1 pcs / box
Lamp Net Weight